LOGIN
REGISTER
CARTApplying decals to a football helmet is an excellent way to show off your team spirit, personalize your gear, and make your helmet stand out on the field. If you’re using high-quality decals from Pro-Tuff Decals, you want to ensure they are applied properly for a sleek, professional finish. Here’s a step-by-step guide to help you apply Pro-Tuff decals to your football helmet.
Why Choose Pro-Tuff Decals?
Pro-Tuff Decals are known for their durability, vibrant colors, and ability to withstand tough playing conditions. These decals are made from high-quality vinyl and feature a strong adhesive that keeps them securely in place, even through rough games. To ensure you get the best results, follow the steps below for a smooth, long-lasting application.
Step-by-Step Instructions for Applying Pro-Tuff Helmet Decals
Step 1: Clean Your Helmet Thoroughly
Before applying any decals, it’s essential to clean your football helmet. Dirt, dust, or oil on the helmet can prevent the decal from sticking properly. Use a mild soap or rubbing alcohol with a soft cloth to remove all debris. Once clean, allow the helmet to dry completely.
Pro Tip: Avoid using harsh chemicals as they could damage the helmet's surface.
Step 2: Prepare Your Decals
Once your helmet is dry, it’s time to get your Pro-Tuff decals ready. Keep the decals in a cool, dry place before use to prevent the adhesive from weakening. Carefully peel back a small portion of the decal’s backing to make application easier.
Step 3: Position the Decal
Positioning is critical to ensure your decal looks sharp. Hold the decal over the helmet without sticking it down yet. Align it with your team’s logo, stripes, or other designs you plan to apply. Take your time to make sure it's straight and centered.
Pro Tip: Start with the helmet’s side decals, as these are usually the largest and trickiest to position. You can use masking tape as a guide to ensure straight alignment before applying.
Step 4: Apply the Decal
Once the decal is positioned correctly, begin applying it by slowly peeling off the backing. Start from one edge, press the decal down, and use your hand or a soft tool like a plastic squeegee to smooth the decal as you go. Press firmly to avoid wrinkles or air bubbles.
Pro Tip: Work from the center outward to ensure an even, smooth application.
Step 5: Smooth Out Air Bubbles
After the decal is applied, check for any air bubbles or wrinkles. Use a soft squeegee or a credit card to push out any bubbles. If a bubble is too stubborn, you can gently poke it with a pin to release the trapped air and then smooth it down again.
Step 6: Finish the Application
Once all decals are applied, double-check for any missed bubbles, and firmly press down on all edges. Allow the decal to set for several hours, or even overnight, to ensure the adhesive fully bonds to the helmet.
Pro Tip: Avoid wearing the helmet immediately after applying decals. Give the adhesive time to cure properly.
Pro-Tuff Decal Care Tips
- Avoid Excessive Heat: Extreme heat can weaken the adhesive over time, so avoid leaving your helmet in a hot car or exposed to direct sunlight for long periods.
- Handle with Care: Rough handling can cause the decals to peel prematurely. Be cautious when putting on or taking off your helmet, especially around the edges of the decals.
- Clean Gently: When cleaning your helmet, use mild soap and water. Avoid harsh scrubbing around the decals, as this can cause them to lift or wear down.
Conclusion
Applying Pro-Tuff decals to your football helmet is a straightforward process, but it requires patience and precision. By following these steps, you’ll ensure your helmet looks game-day ready with a clean, professional finish that will hold up throughout the season.
Whether you’re gearing up for a big game or simply want to show some team pride, Pro-Tuff Decals are an excellent way to elevate your helmet’s look. With their durability and vibrant colors, they’ll stick with you through every touchdown, tackle, and victory!
